SOMFY Roll Up Basic 28 WireFree RTS Li-ion Notice page 11

Les langues disponibles

Roll Up Basic 28 WireFree RTS Li-Ion

3. 6. TIPS AND ADVICE ON OPERATION

Observations

The driven product

The thermal protection has activated.

does not operate.

The control point battery is low.

3. 6. 1. Adding/Deleting Control point

Green LED blinks fast when adding or deleting remote control

Using a control point (A) that has been previously programmed to the driven product:

1) Press and hold the control point programming

button (A) until driven product briefly moves Up and

Down.

2) Quickly press the programming button on the back

of the new control point (B) to add or delete control

point.

Using the Programming button on motor head:

1) Press and hold the motor head programming button

until driven product briefly moves Up and Down.

2) Quickly press the control point programming button

(B) to add or delete control point.

3. 6. 2. Disabling/Activating "RTS" radio technology when control point completely is programmed

Disabling the radio transmission saves battery life during shipment or for a long period of non-use (eg

storage). The following steps can only be performed in "User" mode.

Press and hold the programmed control point

programming button or the motor head programming

button until the driven product briefly moves Up and

Down. (Motor is in programming mode)

TO DEACTIVATE RTS RADIO TECHNOLOGY:

a) Press the UP, MY and DOWN simultaneously until

the driven product briefly moves UP and Down once.

TO ACTIVATE RTS RADIO TECHNOLOGY:

b) Briefly press the motor head programming button,

the driven product briefly moves UP and Down once.

Possible causes

PROG.

Solutions

Wait for the drive to cool down.

Change battery as required.

PROG.