SOMFY Roll Up Basic 28 WireFree RTS Li-ion Notice page 3

Les langues disponibles

Roll Up Basic 28 WireFree RTS Li-Ion

2. INSTALLATION

These instructions are mandatory for the home motorisation and automation professional installing

the drive.

Never drop, knock or puncture the drive or immerse it in liquid.

Install an individual control point for each drive.

2. 1. ASSEMBLY

2. 1. 1. Drive preparation

1) Fit the crown (a) and drive wheel (b) to the

motor.

2) Measure the length (L) between the end of the

drive wheel and the head end.

2. 1. 2. Tube preparation

Cut the tube to the required length.

Deburr the tube and remove the debris.

2. 1. 3. Drive/tube assembly

1) Slide the drive into the tube. Insert the wheel

by aligning the wheel to the tube profile. Insert

the drive half way and then slide the crown

down the drive and insert it in the tube. Finally,

push the motor inside the tube.

2) Not required, but if needed, fix the tube to the

drive with self-tapping screws or steel pop

rivets depending on the dimension (L).

2. 1. 4. Mounting the tube-drive assembly on the brackets

a) Standard bracket

b) Drive plate for specific bracket

⚠

For optimal radio reception, the motor

antenna should be kept straight and should

be positioned outside of headrail (if used).