Riello 393T3 Instructions Pour Installation, Utilisation Et Entretien page 56

3. INSTALLATION
THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.
3.1 HEAT GENERATOR FIXING
Put on the flange (1) the screw and two nuts, (see fig. 3).
➤
Widen, if necessary, the insulating gasket holes (4).
➤
Fix the flange (1) to the heat generator door (3) using screws (5) and (if necessary) the nuts (2) inter-
➤
posing the insulating gasket (4), (see fig. 2).
After installation ensure that burner is lightly inclined as in fig. 4.
➤
Fig. 2
Fig. 3
3.2 WORKING POSITION
1
20062489
20058598
2 3 4
4 GB
20059471
Fig. 4
20059470
5 6