Publicité
Les langues disponibles
Les langues disponibles
Wireless Network
NOTES
✎
If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the
`
wireless network.
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
`
The player supports only the following wireless security key protocols:
`
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless router that is not currently being used. If the channel set for the wireless
`
router is currently being used by another device nearby, it will result in interference and communication
failure.
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router
`
to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-
Fi certification specifications.
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router
`
performance, distance, obstacles, interference by other radio devices, etc).
10
Wireless Router
Broadband service
Settings
The Setup Procedure
• The Home screen will not appear if you
do not configure the Setup.
• The OSD (On Screen Display) may
change in this player after you upgrade
the software version.
• The access steps may differ depending
on the menu you selected.
• After the Setup process is complete, you
can then operate the panel buttons and
remote control.
After you have connected the player to
your TV, turn on the TV and player. When
you turn on the player the first time, the
player's Setup screen appears on the
TV. The Setup procedure lets you set
the On Screen Display (OSD) and menu
languages, the aspect ratio (screen size),
the network type, and connect the player
to your network.
NOTES
✎
The Home menu will not appear if you do not
`
configure the Setup except as noted below.
If you press the BLUE (D) button during network
`
setup, you can access the Home menu even if
the network setup is not completed yet.
When you return to the Home menu, the full
`
screen mode is cancelled automatically.
If you want to display the Setup screen again
`
to make changes, press the ^ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
After the Setup process is complete, you can
`
operate the HDMI-CEC function.
If you want to use the Anynet+(HDMI-CEC)
`
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Setup Procedure.
If you leave the player in the stop mode for more
`
than 5 minutes without using it, a screen saver
will appear on your TV. If the player is left in the
screen saver mode for more than 25 minutes,
the power will automatically turn off.
Menu Navigation
1
2
BONUS REPEAT REPEAT
FULL
HOME Button : Press to move to the
VIEW
A-B
SCREEN
1
Home menu.
RETURN Button : Return to the previous menu.
2
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
3
Activate the currently selected item.
Confirm a setting.
EXIT Button : Press to exit the current
4
menu.
3
4
Publicité
