Samsung BD-J5900 Guide D'utilisation page 12

NOTES
✎
If the TV you connected to the player does
`
not support Movie Frame or the resolution
you selected, the message "If no pictures are
shown after selecting 'Yes', please wait for 15
seconds to return to the previous resolution."
appears. If you select Yes, the TV's screen
will go blank for 15 seconds, and then the
resolution will revert to the previous resolution
automatically.
If the screen stays blank after you have
`
changed the resolution, remove all discs,
and then press and hold the ^ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display
Setup that your TV will support.
When the factory default settings are restored,
`
all stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame
`
feature for the player to use the Movie Frame
(24Fs) mode.
movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature
to Auto allows you to adjust the player's
HDMI output to 24 frames per second
for improved picture quality.
You can enjoy the Movie Frame (24Fs)
feature only on a TV supporting this
frame rate. You can select Movie Frame
only when the player is in the HDMI
1080p output resolution modes.
12
HdmI Color Format
Lets you set the color space format for
HDMI output to match the capabilities of
the connected device (TV, monitor, etc).
HdmI deep Color
Lets you output video from the HDMI
OUT jack with Deep Color. Deep
Color provides more accurate color
reproduction with greater color depth.
progressive mode
Lets you improve picture quality when
viewing DVDs.
Sound Settings
digital Output
Lets you select the digital audio output
format that is suitable for your TV or
AV Receiver. For more details, please
refer to the Digital Output Selection
table below.
digital Output Selection
Setup PCM
HDMI
Connection Coaxial
Receiver
PCM Up to 7.1ch PCM 2ch
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital
Dolby Digital
PCM 2ch PCM 2ch
Plus
Audio Stream
on Blu-ray
Dolby TrueHD PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital
Disc
DTS PCM 2ch PCM 2ch
DTS-HD High
PCM 2ch PCM 2ch
Resolution Audio
DTS-HD Master
PCM 2ch PCM 2ch
Audio
PCM PCM 2ch PCM 2ch
Audio Stream
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital
on DVD
DTS PCM 2ch PCM 2ch
Decodes main feature
audio and BONUSVIEW
Definition for
Any audio stream together
Blu-ray Disc
into PCM audio and add
Navigation Sound Effects.
* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation Sound
Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.
Bitstream
Bitstream
(Re-encoded (Re-encoded Dolby
(Unprocessed)
DTS)
HDMI supported
HDMI HDMI Receiver or
Coaxial AV receiver or
Receiver Coaxial
Re-encoded Dolby
PCM PCM 2ch Re-encoded DTS
Re-encoded Dolby
Re-encoded DTS
Dolby Digital Re-encoded Dolby
Dolby Digital Re-encoded DTS
Plus
Re-encoded Dolby
Re-encoded DTS
Re-encoded Dolby
DTS DTS Re-encoded DTS
DTS-HD High Re-encoded Dolby
DTS Re-encoded DTS
Resol u ti o n Audi o
DTS-HD Re-encoded Dolby
DTS Re-encoded DTS
Master Audio
PCM 2ch PCM 2ch PCM 2ch
Dolby Digital
DTS DTS DTS
Decodes main feature Decodes main feature
Outputs only main feature audio and BONUSVIEW audio and BONUSVIEW
audio stream so that your audio stream together audio stream together
AV receiver can decode the into PCM audio into PCM audio and
audio bitstream. and add Navigation add Navigation Sound
You will not hear Sound Effects, then
BONUSVIEW audio and re-encodes the encodes the PCM
Navigation Sound Effects. PCM audio into DTS audio into Dolby Digital
bitstream
Bitstream
D)
Coaxial
Digital *
Digital *
Digital *
Digital *
Digital *
Digital *
Digital *
PCM 2ch
Dolby Digital
DTS
Effects, then re-
bitstream