Publicité
Les langues disponibles
Les langues disponibles
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of
the product to the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the
other connections.
- When you change the connections, turn off all devices before you start.
NOTES
✎
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
`
Out on the player to an audio system to hear audio.
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your
`
TV.
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first
`
time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
`
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
`
HDMI outputs only a pure digital signal to the TV.
`
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
8
You can connect the Blu-ray player to an audio system using one of the methods
illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
method 1 Connecting to an HdmI compatible AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of
the product to the HDMI IN jack on your receiver.
• Best quality (Recommended)
method 2 Connecting to an AV receiver with a digital Coaxial Cable
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out
Audio
Video
jack on the product to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to
PCM.
Connecting to an Audio System
Method 1
Audio
Method 2
Audio
Publicité
