Publicité
Les langues disponibles
Les langues disponibles
7. When done, press the TOOLS
button and then select the Copy
to USB using the ▲▼ buttons, and
then press the v button. The Copy
to USB pop-up appears.
8. Use the ▲▼ buttons to select the
device to store the copied files, and
then press the v button.
NOTES
✎
Do not disconnect the device while copying is
`
in progress.
9. If you want to cancel copying, press
the v button and then select yes.
Select No to continue ripping.
10. When copying is complete, the
"Copying is completed." message
appears. Press the v button to go
back to the Playback screen.
NOTES
✎
This function may not be supported by some
`
discs.
On the Copying screen, you can also choose
`
Select All and Deselect All.
Use Select All to select all item. This
-
cancels your individual item selections.
Use Deselect All to deselect all selected
-
item at once.
Playing Photo Contents
You can control the playback of photo
content located on a Blu-ray disc, DVD,
CD, USB device, or your computer.
Using the Tools menu
During playback, press the TOOLS
button.
Start Slide Show/
Select to start or stop the
Stop Slide Show
slide show.
Select to set a slide show's
Slide Show Speed
speed.
Background
Select to listen to music
Music
while viewing a slide show.
Select to enlarge the current
Zoom
picture. (Enlarge up to 4
times)
Select to rotate the picture.
(This will rotate the picture
Rotate
either clockwise or counter
clockwise.)
Shows the picture
Information
information.
NOTES
✎
Depending on the disc or storage device, the
`
Tools menu may differ.
To enable the background music function, the
`
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
You can't enlarge the subtitle and PG graphic
`
in the full screen mode.
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM
No operation can be performed
• Check the batteries in the remote control. They may need replacing.
with the remote control.
• Operate the remote control at a distance of no more than 20 feet from the player.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message
• This message appears when an invalid button is pressed.
appears on the screen.
• The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles).
• You've requested a title or chapter number or search time that is out of range.
Play mode differs from the Setup
• Some of the functions selected in the Setup Menu may not work properly
Menu selection.
if the disc is not encoded with the corresponding function.
The screen ratio cannot be
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
changed.
• This is not a problem with the player.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options Menu.
The screen is blank.
• If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the ^ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is deleted.
Forgot password
• Press the ^ button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data is deleted.
The picture is noisy or distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input resolutions.
Abnormal HDMI output screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
SOLUTION
19
Publicité
