Publicité
Les langues disponibles
Les langues disponibles
3. Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4. Copy the RUF file to a USB flash
drive.
5. Make sure there is no disc in the
player, and then insert the USB flash
drive into the USB port of the player.
6. In the player's menu, go to Settings
> Support > Software Upgrade.
7. Select By USB.
NOTES
✎
No disc should be in the product when you
`
upgrade the software using the USB Host jack.
When the software upgrade is done, check the
`
software details in the software Upgrade menu.
Do not turn off the player during the
`
software upgrade. It may cause the player to
malfunction.
Software upgrades using the USB Host jack
`
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software
version is available for the player.
To set Auto Upgrade Notification on,
follow these steps:
1. Select Auto Upgrade Notification,
and then press the v button.
2. Use the ▲▼ buttons to select On,
and then press the v button.
If there is a new software version
available, the player notifies you with a
popup message.
1. To upgrade the firmware, select yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player
on or off manually during an upgrade.)
2. The update progress popup
appears.
3. When the update is completed, the
player will restart automatically.
NOTES
✎
The upgrade is complete when the player
`
turns off, and then turns on again by itself.
Never turn the player off or on manually during
`
the update process.
Samsung Electronics takes no legal
`
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for
assistance with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
Reset
Returns all settings to their factory
defaults except for the network settings.
Media Play
Playing a Commercially
Recorded Disc
1. Press the 8 button to open the
disc tray.
2. Place a disc gently into the disc tray
with the disc's label facing up.
3. Press the 8 button to close the disc
tray. Playback starts automatically.
Playing Files on a USB
Device
There are two methods you can use to
play or view multimedia files located on
a USB device through your player.
method 1
1. Turn the player on.
2. Connect the USB device to the USB
port on the front panel of the player.
The New Device Connected pop-up
appears.
PLAY DISC
PHOTOS
VIDEOS
MUSIC
New device connected.
123
Photos
Videos
No Disc
Music
> Move " Enter ' Return
App 1
App 2
App 3
App 4
App 5
More
Change Device
Settings
NOTES
✎
If the pop-up does not appear, go to Method 2.
`
3. Use the ▲▼ buttons to select
photos, Videos or music, and then
press the v button. The Photos,
Videos & Music screen appears
listing the content of the device.
Depending on how the contents is
arranged, you will see either folders,
individual files, or both.
NOTES
✎
Even though the player will display folders
`
for all content types, it will only display files
of the Content Type you selected in Step
3. For example, if you selected music, you
will only be able to see music files. You can
change this selection by returning to the
Photos, Videos & Music screen and going to
Step 3 in Method 2 below.
4. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
5. Select a file to view or play, and then
press the v button.
6. Press the RETURN button to exit a
folder or the ExIT button to return to
the Home screen.
7. Go to pages 17~19 for instructions
that explain how to control playback
of videos, music, and pictures on a
USB device.
15
Publicité
