Publicité
Les langues disponibles
Les langues disponibles
SYMBOLS
To reduce the risk of injury, user
must read instruction manual.
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms
to the european Directive 2002/96/
Ce. It will then be recycled or
dismantled in order to reduce the
impact on the environment. electric
and electronic equipment can be
hazardous for the environment
and for human health since they
contain hazardous substances.
Multi-function saw
All manuals and user guides at all-guides.com
OPErATING INSTrUCTIONS
BladeRunner
table-top tool for cutting wood, metal, plastic,
and ceramic tile. Lightweight and portable for
use right at the work area. Blade is stationary
while user moves the material for easier, more
precise work.
BEFORE PUTTING ThE MAchINE INTO
OPERATION
1. All covers and safety devices have to
2. It must be possible for the blade to run
3. When working with wood that has been
4. Before you turn oN the switch, make
5. If the cutting operation will produce a
ASSEMBLY
during assembly or adjustment, do not plug
the power cord into a source of power.
other surface so that it cannot tip, slide or walk
during operation.
1. MOUNTING ThE SUPPORT ARM (See
Fig. A1, A2, A3)
(a) Place the support arm (8) on work table. Using
NOTE: Before using the tool, read the
instruction book carefully.
®
—A compact, easy-to-use
be properly fitted before the machine is
switched on.
freely.
processed before, watch out for foreign
bodies such as nails or screws etc.
sure that the saw blade is correctly fitted
and that the machine's moving parts run
smoothly.
high amount of dust, especially hazardous
dust such as ceramic tile or treated wood,
connect an effective vacuum to the vacuum
port (11).
wARNING: To avoid injury from
unexpected starting or electrical shock
wARNING: make sure the saw is
securely mounted to a workbench or
the two screws provided (a), loosely attach the
support arm to the table. Do not tighten the
screws completely yet. (See Fig. A1)
11
EN
Publicité
