Janome 9110DX Livret D'instructions page 58

2
1
56
Threading the Machine (3 threads)
Using the needle on the right only
(for regular three-thread serging)
Turn off the power switch and unplug the machine.
Remove the needle and the thread on the left. Then
retighten the needle clamp screw on the left to prevent
losing the screw.
1
2
1
Using the needle on the left only
(for wide three-thread serging)
Turn off the power switch and unplug the machine.
Remove the needle and the thread on the right.
Then retighten the needle clamp screw on the right
to prevent losing the screw.
1
2
2
Needle on the right
Needle clamp screw on the left
Needle on the left
Needle clamp screw on the right