Publicité
Step 1
å
Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å
To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (12F) into the large holes in the ENDS (A and B).
å
Repeat this step for the UPRIGHTS (D and E), BOTTOMS (C
and O), and BACKS (F and N).
Do not tighten the TWIST-LOCK® FASTENERS in this step.
12F
(24 used)
Page 6
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
A
421934
If you purchased
Hutch, assemble
B
www.sauder.com/service
2
STOP
the 420654
that unit first.
Publicité
