Publicité
Step 21
Step
1
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D428
Groove
å
Fasten the PENCIL DRAWER SIDES (D427 and D428)
to the PENCIL DRAWER BACK (D502). Use two BLACK
1-9/16" FLAT HEAD SCREWS (30S).
3
D428
30S
D511
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BOX FRONT groove.
å
Fasten the PENCIL DRAWER BOX FRONT (D511) to the
PENCIL DRAWER SIDES (D427 and D428). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Page 26
30S
(5 used in Step 21)
D502
D427
D427
30S
2
D428
With the palm of your
hand, tap the DRAWER
BOTTOM into the groove.
å
Slide the PENCIL DRAWER BOTTOM (Y) into the grooves
in the PENCIL DRAWER SIDES (D427 and D428) and
PENCIL DRAWER BACK (D502).
4
Surface with HIDDEN CAM
Tighten the
HIDDEN CAM.
å
Turn the drawer over and fasten the PENCIL DRAWER
BRACE (M65) to the PENCIL DRAWER BOX FRONT (D511).
Tighten one HIDDEN CAM. Fasten the PENCIL DRAWER
BRACE (M65) to the PENCIL DRAWER BACK (D502). Use
one BLACK 1-9/16" FLAT HEAD SCREW (30S).
421934
1
D502
Y
D427
Hidden part using
recycled material.
Color may vary.
30S
D502
M65
D511
www.sauder.com/service
1
Publicité
