Publicité
Step 27
Step
å
Insert a SLIDE CAM (10A) into the SMALL DRAWER SIDES (D30 and D31).
å
Fasten the remaining two EXTENSION SLIDES (40NC) to the SMALL DRAWER SIDES (D30 and D31). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S) through holes #1, through the SMALL DRAWER SIDES, and into the SMALL
DRAWERBACK (D77). Use two GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a KNOB SET (136K) to the SMALL DRAWER FRONT (X). Use one BLACK 1-1/8" MACHINE SCREW (21S).
2
3
21S
BLACK 1-1/8" MACHINE SCREW
(1 used for the KNOB SET)
Page 32
Open end
10A
1
D31
X
136K
GOLD 5/16" FLAT HEAD SCREW
(2 used in holes #3)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D77
D30
2
3
3S
421934
10A
Open end
1
30S
BLACK 1-9/16" FLAT HEAD SCREW
(2 used in this step)
www.sauder.com/service
7
Publicité
