Publicité
Step 9
å
First, fill two holes in the RIGHT UPRIGHT (D) 1/4 to 1/2 full with GLUE (177M).
Then, insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown.
å
Now, fill the holes in the LEGS (H and P) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEGS (H and P) to the RIGHT UPRIGHT (D). Tighten six
HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the RIGHT UPRIGHT insert into the LEGS.
Wipe away the excess GLUE.
15F
These surfaces
should be even.
15F
These surfaces
should be even.
Page 14
P
D
S u r
f a c
H I D
e w
D E N
i t h
C A
M S
H
421934
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Edge with hole
Edge with
TWIST-LOCK®
FASTENERS
Edge with hole
www.sauder.com/service
1
Publicité
