Publicité
Step 17
Step
å
NOTE: You will need someone's help in this step.
å
First, fill the holes in the LEGS (H and P) 1/4 to 1/2 full with GLUE (177M).
Then, insert eight WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
å
Next, fill eight holes in the TOP (S) 1/4 to 1/2 full with GLUE (177M).
å
NOTE: Use the exact holes shown.
å
Now, fasten the ENDS (A and B) and UPRIGHTS (D and E) to the TOP (S).
Tighten eight TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the LEGS insert into the TOP. Wipe
away the excess GLUE.
P
A
H
If you purchased the 420654 Hutch, finish
drilling through these four holes in the TOP
before fastening the ENDS and UPRIGHTS.
Page 22
NOTE: If you are attaching the 420654 Hutch, you need to finish
drilling four holes in the TOP (S) before completing this step.
H
D
P
This large hole
must be here.
P
E
H
S
Meet Part (S). This component has been
engineered to be lighter, stronger, faster...
well ok. Not technically faster. But
definitely makes for a sturdier Computer
Desk that' s easier to assemble and
friendlier to the environment.
421934
2
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
H
B
P
15F
www.sauder.com/service
(8 used)
Publicité
