Breville the Juice Fountain Elite Livret D'instructions page 10

ASSEMBLING yOUR BREvILLE PROdUCT PAge heAder.....
1. Place Filter Bowl Surround on top of the
Motor Base.
2. Align the arrows on the Nutri Disc™ with
the arrows on the Motor Drive coupling
and push down until it clicks into place.
Ensure the Nutri Disc™ is fitted securely
inside the Filter Bowl Surround and onto
the Motor Base.
3. Place the Juicer Cover over the Filter
Bowl Surround, positioning the Juicer
Cover over the Nutri Disc™ and lower
into position.
10
All manuals and user guides at all-guides.com
4. Raise the Safety Locking Arm up and
lock into the two grooves on either side
of the Juicer Cover. The Safety Locking
Arm should now be in a vertical position
and locked into place on top of the
Juicer Cover.
5. Slide the Food Pusher down the Feed
Chute by aligning the groove in the
Food Pusher with the small protrusion
on the inside of the top of the
Feed Chute.
6. Continue to slide the Food Pusher down
the Feed Chute.