Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
This light is extinguished while the
imbalance exceeds preset limits.
These lights show which balancing valves
are open. They are extinguished when
balancing is complete, except for intermittent operation as the balancing system
compensates for changes in the imbalance. Lights that stay on through most extractions
may indicate inadequate water supply to the balancing system or that the balancing
system requires service.
Service is required if all three lights illuminate at the same time.
Hold this switch to
to flush water into the first
compartment of the supply injector. Hold this
switch to
to use the spray nozzle to clean the
supply injector.
Press this button to flush the chemical supply
manifold with fresh water.
Set this switch to
to disable all machine
functions and hold the drain closed. The machine
can be powered off with the drain closed for
overnight soaking. Set to
to permit normal
operation.
Set this switch to
to have the machine communicate with the Mildata computer. Set
to
to use internal machine formulas.
causes the Ampsaver controller to delay extraction when necessary to prevent the
amperage drawn by all machines from exceeding a preset maximum.
prevents the
Ampsaver controller from affecting machine operation.
Publicité
