Milnor Mark II Fonctionnement page 15

>_b]Q\ ?`UbQdY_^±=Qb[ 99
DY\d Dg_ GQi GQcXUb 5hdbQSd_b
follows:
Models 48032BTx, 48036QTx, 52038WTx, 72044WTx—Set the Rear/Front Tilt switch
( ) to Rear (
switch ( ) to up (
its forward limit.
Models 64046E6N, 72046E5N—Simultaneously hold the Start button (
Up/Down Tilt switch (
machine stops at its forward limit.
Simultaneously hold the Start button (
buttons are released.
Change rotation direction and rotate again, if necessary.
button ( ) and hold the Up/Down Tilt switch (
its non-tilted position.
All manuals and user guides at all-guides.com
Place the cart or other receiving device under the door, then tilt as
). Simultaneously hold the Start button (
). Hold until the desired tilt angle is reached or the machine stops at
) to up ( ). Hold until the desired tilt angle is reached or the
) and the Jog switch (
=C?E@>>?15 )$##1F & '
) and hold the Up/Down Tilt
or ). The cylinder turns until
Simultaneously hold the Start
) to down ( ). Hold until the machine reaches
) and hold the