Publicité
Safety
Signs, symbols and instructions placed on this product must never be covered or removed and
must remain present and clearly legible throughout the entire lifetime of the product. Immedi-
ately replace or repair illegible or damaged signs, symbols and instructions. Contact your local
dealer for instructions.
Caregiver
Read all of the instructions carefully before use and keep them for future reference.
Incorrect use of this product may cause serious injury to the user
Always use the correct lifting and transfer techniques for this purpose. Read the
user manual of the transfer equipment before use
Never leave the user unattended in this product. Ensure permanent supervision by
an adult. The Caregiver is responsible for the safety of the user
Repair/replacements must only be made using new original R82 spare parts and
fittings and carried out in accordance with the guidelines and service intervals pre-
scribed by the supplier
If there is any doubt as to the continued safe use of your R82 product or if any
parts should fail, stop using the product immediately and contact your local dealer
as soon as possible
Environment
For the purpose of safety and comfort, always move the product away from the sun
and allow to cool before use
Use this product on a level surface without any obstacles. Be aware of reduced
maneuverability on slippery roads
When using on inclines, please refer to measurements
User
If the user is close to the max. load limit and/or has a lot of involuntary movements,
e.g. rocking, a larger size with a higher max. load or a different R82 product should
be considered
Product
Carry out all positional adjustments on the product and accessories and ensure that
all knobs, screws and buckles are securely fastened before use. Keep all tools out
of the reach of children
Activate the brakes before placing the user into the product
Activate the anti-tips when the product is being used on inclines
Activate the anti-tips before angling the seat and back
Deactivate the anti-tips before crossing kerbs etc. higher than 100 mm
Ensure the stability of the product is maintained before placing the user in it
We recommend you notify the user before angling the seat and back
Ensure the castors are fully-functional and secure before use
Inspect the product and all of its accessories and replace any worn out parts before
use
Do not expose the piston rod to scratches etc. It is important to use a cloth or the
like, if tools are used to adjust the gas spring
This product is tested for resistance to ignition at level non-ignition in accordance
with EN 1021-1, EN 1021-2 and ISO 7176-16
This product might loose its flame resistant characteristics if using other than
original R82 cushions
support.R82.org
All manuals and user guides at all-guides.com
ENGLISH
37
EN
Publicité
