geo-FENNEL Selection PRO FL 66-Xtreme SP Mode D'emploi page 21

EN
F
POWER ON THE INSTRUMENT
Set ON/OFF knob to position „ON" . The instrument is now ready for use (ON/OFF
LED is illuminated). An audible and optical (blinking lines) alarm indicates when
the instrument was set up outside of the compensator range. Set up the instru-
ment on a more even surface.
To switch off the instrument bring ON/OFF knob in position „OFF" . The instrument
is now switched off and the compensator is blocked to avoid damages during
transport.
NOTE: During transport ON/OFF knob (compensator clamp) must be set to „OFF" .
Disregard may lead to damages of the compensator.
MANUAL FUNCTION / RECEIVER (optional)
The instrument is switched off (OFF position).
Press button MANUAL FUNCTION / RECEIVER once to enter into the MANUAL
function. The MANUAL LED is illuminated. Now the required laser lines can be
switched and the instrument can be used in slope position.
Press this button again to switch on the receiver function. The receiving LED is
illuminated. Now the receiver FR 55 (optional) can detect the laser lines projected
from the instrument.
Press the button once more in order to switch off the instrument.
21