Publicité
Les langues disponibles
Les langues disponibles
CONTENTS OF CARTON
Air Compressor (1)
Air Hose (1)
Female Tire Chuck (1)
Inflator Accessory Kit (1)
TOOLS REqUIRED FOR ASSEMBLY
1 - 9/16 inch open end wrench
1 - adjustable wrench
UNPACKING
Remove unit from carton and discard all packaging.
NOTE: Save all parts bags.
ASSEMBLE HOSE
Assemble hose to air outlet. Apply
tape to hex fitting. Tighten hose onto
hex fitting hand-tight, plus 1/4 –turn
with wrench, tighten to 15 inch-
pounds.
IMPORTANT: The hex fitting on the air
outlet MUST be held in place with a
wrench (Fig. 1) when tightening hose
onto air outlet.
ASSEMBLE ACCESSORIES
(FIG. 2)
To reduce the risk of
injury, turn unit off and disconnect it
from power source before installing and
removing accessories, before adjusting or
when making repairs. An accidental start-
up can cause injury.
Choose the accessory needed.
NOTE: Apply thread seal tape to
threads of exposed fittings.
Assemble Female Tire Chuck
Assemble female tire chuck to hose
and tighten securely with wrenches.
Assemble Other Accessories
1.
Attach the hose adapter to hose.
2.
Choose the needed accessory.
Attach the tapered nozzles, nee-
dle or high flow inflator/deflator adapter body to the hose adapter.
ASSEMBLY
2
Safety Tip
Tapered
Nozzles
Blow Gun
Adapter
Inflation
Needle
9 - ENG
Female
Tire Chuck Industrial Plug
Industrial
Plug
Universal
Coupler
Blow Gun
Hose
Industrial
Adapter
Plug
High Flow Inflator/defla-
tor Adapter Body with
nozzles
1
Hose
End
Publicité
