Publicité
Les langues disponibles
Les langues disponibles
OPERATING YOUR BREVILLE PRODUCT
PAGE HEADER.....
NOTE
Operate the blender only for the
appropriate amount of time required.
The Blender will automatically stop
blending on the Blend function after
120 seconds (2 minutes) and after 60
seconds (1 minute) on the SMOOTHIE
and ICE/AUTO PULSE functions to
avoid over processing.
FUNCTION
BLEND
SMOOTHIE
ICE/AUTO
PULSE
NOTE
The SMOOTHIE function has a unique
processing technique that blends the
denser ingredients at a lower function,
then increases as ingredients thicken.
This may happen several times while
blending smoothies.
7.
To stop blending at any time, press the
selected speed button. The POWER
button can also be pressed.
8.
At the end of use, always ensure the
Blender is turned off by pressing the
POWER button on the control panel,
then unplug the cord. Ensure the
motor and blades have completely
stopped before attempting to move the
appliance, or when the Blender is not in
use and before disassembling, cleaning
and storing.
800BLXL_IB_B13_FA.indd 13
All manuals and user guides at all-guides.com
PROGRAMMED TIME
120 seconds (2 minutes)
60 seconds (1 minute)
60 seconds (1 minute)
NOTE
During the blending process,
ingredients may stick to the sides of
the blender jug. To push the food back
onto the blades, press the POWER
button to turn the blender off and
and remove the power cord from the
power outlet. Remove the lid and use
a plastic spatula to scrape down the
sides of the jug. Replace the lid before
recommencing blending.
NOTE
If the blades become stuck, the
blender will automatically turn off. To
reset, turn the blender off, clean jug
with spatula and then turn back on
and the blender will reset.
NOTE
If any moisture or liquid appears on
top of the motor base during blending,
press the POWER button on the
control panel and remove the power
plug. Remove the blender jug. Wipe
the motor base immediately with a
dry cloth or paper towelling to absorb
the liquid. Check the blender jug is
correctly assembled.
13
8/04/13 10:10 AM
Publicité
