Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PAGE HEADER.....
POSSIBLE PROBLEM
Motor doesn't start or blade
doesn't rotate
Food is unevenly chopped
Food is chopped too fine or
is watery
Food sticks to blades
and jug
Overload blender
22
800BLXL_IB_B13_FA.indd 22
All manuals and user guides at all-guides.com
EASY SOLUTION
•
Check that the blender jug is securely locked
into position.
•
Check that the blade assembly is correctly attached
to the base of the blender jug.
•
Check that the POWER button and selected function
or speed setting is illuminated.
•
Check that the power plug is securely inserted into
the power outlet.
•
Either too much food is being blended at one time or
the pieces are too large.
•
Try cutting food into smaller pieces of even size and
processing a smaller amount per batch.
•
For best results, the food should be chopped into
pieces no larger than 1 inch.
•
The food is over processed. Try using the ICE/AUTO
PULSE function or process for a shorter time.
•
The mixture may be too thick. Try adding more liquid
to the mixture and/or use another function
•
The motor is protected from burning out by an
automatic, temperature operated, overload switch.
•
If the blender is overloaded or operated continuously
for too long, the motor may overheat. If this happens,
the buttons will start to flash and the safety overload
switch will prevent the blender from operating. To
operate the blender again, you must unplug and
allow to cool for approximately 30 minutes. Once the
motor has fully cooled, it is ready for use again.
8/04/13 10:10 AM
Publicité
