Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CONFIGURATION
Monitor setup under Windows 95/98 and 2000:
For Windows 95/98 and 2000 users: Installation of the
Belinea driver software is highly recommended. This
can be obtained from your Belinea dealer or
downloaded from Belinea's internet homepage at
www.belinea.de. Choose Support, Downloads, then
Driver Files, and download BELINEA.EXE by clicking
on Driver Download....
Copy the file to a folder on your hard disk (e.g.
C:\BELINEA),
and
double-click
decompression.
BASIC SETUP
Shortcut for adjusting contrast and brightess ......................................................................................................
You can adjust the contrast and brightness directly by
ƒ
turning the OSD dial (
in figure 4) while the OSD
menu is not active. Turning the dial clockwise displays
the OSD contrast menu, while turning it counter-
IMAGE SETTINGS USING THE OSD MENU
The OSD menu appears in a window on your screen.
It allows you to select the image settings you want to
change.
How to open the OSD menu ...................................
1. Press the MENU/EXIT button (
display the OSD menu on the screen.
Figure 4. Monitor features
14 - Belinea 10 80 80
All manuals and user guides at all-guides.com
After decompression you will find the file BELINEA.TXT
in your folder, providing further information on how to
install the Belinea driver software.
Monitor setup under Windows NT 4.0:
Under Windows NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the "Settings" à "Control
Panel" à "Display" à "Settings" menu.
it
to
start
clockwise displays the OSD brightness menu. Then turn
the dial clockwise to increase, or counter-clockwise to
decrease the contrast/brightness.
2. There are 9 different OSD submenus organized by
„
in figure 4) to
3. If the selected category contains multiple functions,
4. Press the ENTER button (
5. Enter the desired value by turning the OSD dial.
6. To store the setting, press the ENTER button again.
7. Select the option "Back to Main Controls" using the
8. If the OSD menu is idle for about 20 seconds, it
categories. Select the desired category (see the
following section "OSD Menu Functions") by turning
ƒ
the OSD dial (
in figure 4), and press the ENTER
…
button (
in figure 4).
select the desired function icon using the OSD dial
ƒ
(
in figure 4, see the following section "OSD Menu
Functions").
…
in figure 4) to activate
the function.
Repeat steps 2-5 to make further adjustments as
needed.
OSD dial, and press the ENTER button once or
twice to return to the main menu. If necessary,
repeat steps 2-6 to make additional adjustments.
closes automatically while saving the current
settings. You can also close it manually by pressing
the MENU/EXIT button.
Publicité
