BELINEA 10 80 80 Mode D'emploi page 15

ENGLISH
FEATURES
This monitor is suitable for connection to IBM-compatible systems equipped with a 15-pin VGA connector. An
overview of the numerous functions and features is provided below.
Multiscan The monitor automatically scans all horizontal frequencies between 30 and 121 kHz
30 - 121 kHz as well as all vertical frequencies between 50 and 160 Hz.
50 - 160 Hz
Stripe mask This Super VGA monitor is equipped with a high resolution CRT with a stripe mask of
0.24 mm
.24 mm.
Resolution
The monitor attains maximal resolution of 2048 x 1536 pixels (75 Hz, non-interlaced).
2048 x 1536
Digital Front
Digital Front Control with 26 memory settings (10 factory-preset and 16 user-defined
Control
modes) makes the setting of various graphic and color modes easy.
On Screen
This 22 inch monitor is equipped with an OSD (On Screen Display) menu to make
Display
professional adjustments easy.
MPR II,TCO 99
This monitor exceeds the MPR II emission requirements and TCO 99.
IMPORTANT INFORMATION
Note on monitor placement
•
The setup location must not be extremely hot,
cold, humid or dusty. Heat and cold can impair
the functionality of the monitor. Humidity and
dust can cause the monitor to fail.
•
Don’t place the monitor near heaters such as
radiators or the like. Don’t expose the monitor
to mechanical vibrations or jarring.
•
Position the monitor so that no direct light or
sun strikes the screen, which could cause
reflections that reduce the quality of the image.
•
Equipment that generates magnetic fields, i.e.
laser printers, speakers, etc., must not be placed
close to the monitor. They can distort the image.
Notes on power connection
Only use the power cord designated for use in
your country.
•
After turning off the monitor wait for 30 seconds
before disconnecting the power cord. This time
is needed for the static electricity on the screen
to dissipate.
The wall outlet should be within easy reach.
Pulling the power plug is the only way to
disconnect the monitor from the power source.
12 - Belinea 10 80 80
All manuals and user guides at all-guides.com
Safety instructions for operation
•
•
•
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the
cable itself.
Never put anything on top of the monitor,
especially not any container with liquid. If liquid
enters the monitor it may cause electric shock
or short circuit.
Avoid covering the ventilation slots. Air
circulation is necessary to prevent the monitor
from overheating. If the air circulation is
restricted it could cause fire or damage the
monitor.
Do not use any solvents to clean the monitor,
as the housing could be damaged. For more
information about cleaning the monitor, please
see “Caring for your Monitor”.
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced
by qualified professionals.