Nikon Lite Touch Zoom 100W Manuel D'utilisation page 43

Film advance
Film automatically advances by one frame after each shot; Auto rewind at the
end of film roll; Mid-roll rewind function available
Remote control (optional) (Lite Touch Zoom 100W QD only)
Infrared wireless remote control; 2 sec. delay shutter release; Effective range is
within approx. 5m straight in front of the camera; One 3 V lithium (CR2025) battery.
Battery will last for approx. 5 years; Dimensions (W × H × D): approx. 60 × 28 ×
7mm; Weight (including battery): approx. 10 g
Built-in flash
Four flash modes available: Auto Flash, Flash Cancel, Anytime Flash, and Night
Portrait (Slow Sync Flash); Flash automatically fires when there is not enough
light; Flash shooting range (ISO 100): approx. 0.65 – 3.0m at 28mm, approx. 0.65
– 1.8m at 100mm, (ISO 400): approx. 0.65 – 6.0m at 28mm, approx. 0.65 – 3.6m at
100mm; Shutter release button is locked when the flash charging is not completed;
Recycling time approx. 6 sec.
Red-eye Reduction mode
Red-eye Reduction lamp lights up for approx. 1 sec. before flash fires.
Battery life
Approx. 15 rolls of 24-exposure film when flash is used for half the exposures
LCD panel (Power is on)
Frame counter, Flash mode, Red-eye Reduction, Self-timer, Remote Control (Lite
Touch Zoom 100W QD only), Infinity Focus mode, Battery power, Time/Date
(Lite Touch Zoom 100W QD only)
Power source
One 3 V lithium battery (CR123A type or DL123A)
Date imprint function (Lite Touch Zoom 100W QD only)
Imprinted date include year, month, day, hour, (24-hour cycle with no AM/PM)
and minute with five choices; Year/Month/Day, Month/Day/Year, Day/Month/Year,
Day/Hour/Minute, and no-imprint; Leap year adjustment until 2042; Power source
is the same as the camera body; Built-in clock with timing accuracy within ± 90
seconds a month
Dimensions (W × H × D)
Approx. 115 × 65 × 41.5mm
Weight (without battery)
Lite Touch Zoom 100W: Approx. 200 g
Lite Touch Zoom 100W QD: Approx. 200 g
• Specifications apply when a fresh battery is used at normal temperature (20 °C).
• Specifications and design are subject to change without notice.
Additional Information
En
43