Loading The Film - Nikon Lite Touch Zoom 100W Manuel D'utilisation

Loading the film

Recommended film
Use DX-coded 35mm film with this camera. It is recommended to use
DX-coded ISO 400 film, which provides good results when using the
flash, and helps avoid blurred images, should camera shake occur.
Hold the film cartridge and ensure film is properly positioned with no slack.
16 Preparations
Close the slide cover, then open
1
the camera back.
Slide the camera back lock release lever
(1), and open the camera back (2).
When loading/unloading film, be sure
not to open the camera back cover into
direct sunlight.
Insert a film cartridge.
2
When loading the film, take care not to
touch the lens inside of the camera.
Pull the film leader
3
across to the green index
mark inside the film
compartment.
Make sure to align the film leader to the
green index mark; if the film leader is
not properly aligned to the index mark
(short of or beyond the mark), film
may not be loaded properly.