Preparations; Turning The Camera On; Checking The Battery Power - Nikon Lite Touch Zoom 100W Manuel D'utilisation

Turning the camera on

When closing the cover, first slide it slightly in to start lens retraction.
When the lens is completely retracted, slowly close the cover.

Checking the battery power

Make sure that the sufficient Battery Power
indicator (
Lite Touch Zoom 100W
showing
blinking
(no indicators)
Always check the battery condition before shooting.
We recommend that you take spare batteries with you, especially when
travelling.
When only the power indicator is not displayed, (and all other
indicators are displayed), the shutter cannot be released. The rewinding
can only be performed.
Open the slide cover until it
clicks.
Once you open the slide cover in the
direction of the arrow, the camera is
turned on, the built-in flash automatically
pops up, and the lens extends out.
The camera is set in Auto flash mode.
(
) is showing on the LCD panel.
The battery power is sufficient.
The battery is nearing exhaustion.
Have a fresh one ready.
Replace the battery with a new one.
p. 28)
Lite Touch Zoom 100W QD
En

Preparations

15