LGB 21000 Mode D'emploi page 6

Safety Notes
• This locomotive is to be used only with an operating
system designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety Notes in the instructions
for your operating system.
• This product is not for children under 15 years of age.
• The wire used for feeder connections to the track may
only be a maximum of 2 meters / 39 inches long.
• WARNING! Sharp edges and points required for operation.
Hint: If this model is equipped with a decoder, the digital/ana-
log DIP switches on the loco circuitboard will be set to "OFF".
On decoder-equipped models, the DIP switches remain in this
setting, even if the models are used on an analog layout.
CAUTION! If this model is equipped with Multi-Train System
decoders, do not operate this model with catenary power.
Operate decoder equipped locos with track power only.
6
All manuals and user guides at all-guides.com
General Notes
• The operating instructions are a component part of the
• Please see your authorized LBG dealer for repairs or
• http://www.maerklin.com/en/imprint.html
Functions
• The model is designed for operation on LGB two-con-
• This model comes equipped with a decoder connector
• Use a locomotive controller with more than 1 amp of train
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
spare parts.
ductor DC systems with conventional LGB DC locomotive
controllers.
(Figure 2). An LGB multi-train system decoder (item no.
55027) can be installed on it.
current for this model.