Settings
Canceling the DEMO Mode
You can cancel the demonstration display
which appears while this unit is turned off.
1
Press and hold SELECT.
The setup display appears.
2
Rotate the control dial to select
[DEMO], then press it.
3
Rotate the control dial to select
[DEMO-OFF], then press it.
The setting is complete.
4
Press
(back).
The display returns to normal reception/
play mode.
Basic Setting Operation
You can set items in the menu to the
following procedure.
The following items can be set depending on
the source and setting.
1
Press SELECT for the sound setup,
press and hold SELECT for the
general setup, or press CALL for the
BLUETOOTH setup.
2
Rotate the control dial to select the
desired item, then press it.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press
(back).
General Setup
CLOCK-ADJ (clock adjust) (page 8)
CT (clock time)
Activates the CT function: [ON], [OFF].
BEEP
Activates the beep sound: [ON], [OFF].
CAUT ALM (caution alarm)
Activates the caution alarm: [ON], [OFF]
(page 8). (Available only when the unit is
turned off.)
AUX-A (AUX audio)
Activates the AUX source display: [ON],
[OFF]. (Available only when the unit is
turned off.)
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: [NO],
[30S] (30 seconds), [30M] (30 minutes),
[60M] (60 minutes).
DEMO (demonstration)
Activates the demonstration: [ON], [OFF].
DIMMER
Changes the display brightness: [ON],
[OFF].
AUTO SCR (auto scroll)
Scrolls long items automatically: [ON],
[OFF].
19
GB