Other Functions; Using The Rotary Commander - Sony CDX-M770 Mode D'emploi

Other Functions

You can also control the unit (and optional CD/
MD units) with an optional rotary commander.
RM-X5S (supplied with CDX-M770 only)
RM-X4S (optional)
The illustrations in this manual are of the RM-X5S.
The explanations are the same for the RM-X4S.

Using the rotary commander

First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S O U N D
M O D E
D S P L
Inserting the supplied lithium battery
(RM-X5S only)
Tip
For information or lithium battery, refer to "Notes on
lithium battery" (page 36)
32
D S P L
M O D E
S O U N D
x
+ side up
By pressing buttons
Turn the dial to change the
direction of infrared rays.
(RM-X5 only)
(ATT)
(SOUND)
(SOURCE)
(DSPL)
Rotate the VOL control
to adjust the volume.
Press To
(SOURCE)
Change source
(radio/CD/MD*
(MODE)
Change operation
(radio band/DAB*
MD*
(ATT)
Attenuate sound
(OFF)*
2 Stop playback or radio
reception
(SOUND)
Adjust the sound menu
(DSPL)
Change the display item*
*1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for 2
seconds to turn off the clock indication after turning
off the ignition.
*3 When using the RDS function, you can press
(DSPL) to show "PTY" in the display. Then you can
only use your master unit or card remote
commander to receive the PTY data (Only
European models).
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
(MODE)
(OFF)
1 )
1 /CD unit/
1 unit)
3
SEEK/AMS
control