Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Pedal Resonance
Pedal resonance is a function that simulates the reverberation of notes when pressing the sustain pedal on
an acoustic piano. When you use the included sustain pedal with Pedal Resonance enabled, the Concert
reproduces the rich harmonics and unique sound characteristics of an acoustic piano.
To turn Pedal Resonance on or off:
1.
Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode.
The two button LEDs will be lit.
2.
Press the key marked Pedal Resonance to turn the function on or off.
3.
Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Note: When the Pedal Resonance is activated, the chorus effect will be automatically disabled.
Note: If you switch the Pedal Resonance on/off while performing, there may be a slight pause in the
Concert's signal output.
Lesson Mode
For instructional purposes, the Lesson Mode feature divides the 88 keys into two zones with the same
pitch-range and voice. This enables both student and teacher to easily watch each other and play together
without having to move away from the piano, take turns, or reach over each other.
To enable or disable Lesson Mode, press the Lesson button.
To select a voice for both zones in Lesson Mode, press one of the Voice buttons.
To change the split point in Lesson Mode, press and hold the Split button, press a key between C3 and C6,
and then release the Split button. The default split point is E3.
To change the octave of the two zones in Lesson Mode:
1.
While in Lesson Mode, press the Metronome and Lesson buttons at the same time to enter
Advanced Function Mode. The two button LEDs will be lit.
2.
Use the keys marked Octave + or Octave - to adjust the octave value. Press both keys at the same
time to restore the default octave value to 0.
3.
Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Note: In Lesson Mode, Layer and Split Modes are automatically disabled.

Auto Power Off

In order to save energy, the Concert Digital Piano will automatically shut down after 30 minutes if it is not
used.
To enable or disable the Auto Power Off function:
1.
Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The
button LEDs will be lit.
2.
Use the keys marked Auto Power Off to enable or disable the Auto Power Off function.
3.
Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Recital

Table des Matières