Nakayama PH2570 Mode D'emploi page 2

EN
SPECIFICATIONS
Technical Data
Model
Displacement
Power
Double Blade
Fuel Tank Capacity
Max Diameter Cut
Cutting Length
Fuel Type
Net Weight
WARNING! The engine exhaust from this product contains chemicals known to cause cancer, birth defects or other reproductive harm.
WARNING! Before using our products, please read this manual carefully to understand the proper use of your unit.
SAFETY FIRST! Instructions contained in warnings within this manual marked with a ⚠ symbol concern critical points which must be taken into
consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them
without fail.
Warnings in the Manual
WARNING! This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.
IMPORTANT! This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.
NOTE! This mark indicates hints or directions useful in the use of the product.
2
PH2570
25.4 cc
1.2 Hp
70 cm (laser cut)
530 ml
28 mm
550 mm
Gasoline
5.8 kg
WWW.NIKOLAOUTOOLS.GR
Main Parts
1. Fuel tank
2. Starter
3. Throttle lever
4. Ignition switch
5. Throttle Cable
6. Muffler
7. Blade
8. Front handle
9. Rear handle
* The manufacturer reserves the right to make minor changes to product design and
technical specifications without prior notice unless these changes significantly affect the
performance and safety of the products. The parts described / illustrated in the pages of the
manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair,
inspection, repair or replacement work, including maintenance and special adjustments,
must only be carried out by technicians of the authorized service department of the
manufacturer.
* Always use the product with the supplied equipment. Operation of the product with
non-provided equipment may cause malfunctions or even serious injury or death. The
manufacturer and the importer shall not be liable for injuries and damages resulting from
the use of non-conforming equipment.