Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Lift the hood and hang it on the wall bracket.
Installation for curved glass and T-shaped models
Attach the check valve on the
hood
ventilation duct (supplied) to
the valve (see picture).
Slide the top part of the chimney
inside the bottom and pull the top
up to the desired height.
Once the chimney is positioned at
the correct height, hook the two
parts together, as shown below.
38
and
connect
the
Publicité
Chapitres
Table des Matières
Dépannage
