Publicité
Les langues disponibles
Les langues disponibles
3.
Press the circle key to set the selection.
6.4.5. Compatibility mode (as of firmware R4.00)
The compatibility mode is used to operate a ComTerminal from firmware R4.00 in exist-
ing installations. Compatibility mode is enabled in the factory settings of the ComTermi-
nal.
As of firmware R4.00 of the ComTerminal, the disconnection of plug-in call devices in the
room is triggered as a separate call type "Plug alert". In addition, "Service calls" can be
®lite
raised with an ePat
call devices is triggered as call type "call"; service calls cannot be triggered at all. To use
the new functions, you must disable the compatibility mode.
CAUTION
Disabling the compatibility mode can result in system malfunctions in existing
installations! The new functions have various requirements for the nurse call
system. In particular, consoles running PrimusGlobal software must be upda-
ted to a revision level of 3.18 or higher. Existing systems often have a very
complex structure (installation history, special solutions, firmware revisions).
Therefore, disabling the compatibility mode requires a check and, if necessary,
adaptation of the existing system.
Displaying the firmware revision
1.
Highlight Info using the arrow keys. Then press the circle key.
2.
Press the home key to return to the menu.
Disabling/enabling the compatibility mode
1.
Highlight System using the arrow keys. Then press the circle key.
2.
Highlight Compatibility using the arrow keys. Then press the circle key.
3.
To disable compatibility mode, highlight Off using the arrow keys. To enable it,
highlight On.
4.
Press the circle key to set the selection.
6.5. Optional settings
The remaining menu items provide optional settings. Set these if required, e.g. key
functions.
6.5.1. Key Function
Presence cancels WC (as of firmware R4.00)
• Off = WC calls and WC emergency calls must be cancelled with a grey WC cancel
button (= factory setting). The factory setting complies with the requirements of the
German standard DIN VDE 0834.
20
in the room. In compatibility mode, the disconnection of plug-in
00 8802 97, 03/23 (Rev. 7.0)
Publicité
