Publicité
Les langues disponibles
Les langues disponibles
Menu item Subitem
Audio Test
Key Function
System
Compatibility Disabling/enabling the compatibility mode.
Reset
6.4. Mandatory settings
6.4.1. Setting the language
1.
Highlight Language using the arrow keys. Then press the circle key.
2.
Highlight the desired language using the arrow keys: D = German; GB = English; etc.
3.
Press the circle key to set the selection.
6.4.2. Selecting the room type
1.
Highlight Room type using the arrow keys. Then press the circle key.
2.
Highlight the desired room type using the arrow keys:
• Patient room
• Patient room with cancel key for WC call at the ComTerminal
• Staff room (Calls with presence switched on are not signalled with higher priority.
This setting is only recommended in staff rooms of systems with Management-
Center.)
• Children's room (no key to switch the privacy function at ComTerminal. Privacy
OFF)
• Connection terminal (keys and display at ComTerminal non-operational)
3.
Press the circle key to set the selection.
6.4.3. Setting of RAN number (0 – 30)
RAN number = Number of devices in the room (switches, connection sockets, room
lamps, etc.) that are connected via RAN. (No plug-in connected devices, e.g. pear push
switches).
1.
Highlight RAN using the arrow keys. Then press the circle key.
2.
Highlight RAN number using the arrow keys. Then press the circle key.
3.
Highlight the desired RAN number using the arrow keys.
4.
Press the circle key to set the selection.
6.4.4. Setting of room address (0 – 110)
Each ComTerminal has a unique address on the OSYnet group bus.
1.
Highlight Address using the arrow keys. Then press the circle key.
2.
Highlight the desired room address using the arrow keys.
00 8802 97, 03/23 (Rev. 7.0)
Meaning
Only for Tunstall technicians.
Setting of the function of the keys of this device.
Restart this device.
19
Publicité
