Publicité
Les langues disponibles
Les langues disponibles
The four function keys [b], the microphone [f] and two loudspeakers [h] are used to
answer forwarded calls from other rooms when presence is switched on.
3.1. Components shown in the figures
[a]
Display
[b]
Function keys
[c]
Alarm key (blue)
[d]
Call key (red)
[e]
Presence key (green) for staff 1
[f]
Microphone
[g]
Presence key (yellow) for staff 2
[h]
Loudspeaker
a.
[1]
Four back box screws
[2]
Pattress
[3]
Connection wires to the two loud-
speakers
[4]
Two loudspeakers
a.
[5]
Back box
4. Mounting/Dismantling
4.1. Back box installation (→ fig. B)
When installing the back box consider the space required for the
ComTerminal. Measuring from the centre of the box, the available
space must be at least 120 mm above and below.
4.2. Mounting the pattress (→ fig. B)
Wall mounting on two-gang back box:
1.
Feed the connection cables through the outlet in the pattress [2].
2.
Fix the pattress [2] to the back box [5] using the back box screws [1].
3.
Connect the connection cables to the connection field in the pattress [2] according
to Section 5: "Connecting to the connection field (→ fig. E, F)" (page 15).
NOTE! If mounting on a back box is not possible, the ComTerminal may be fixed to the
wall with dowels and screws using the same holes in the pattress. Screws and dowels not
included in the scope of delivery of the ComTerminal.
14
[6]
Front panel
[7]
Flat cable
[8]
Hinge
[9]
Catch
[10] Security screw (M3, 10 x 3 mm,
cross-head PZ)
[11] Connection field
[12] Socket for flat cable
[13] Power supply
[14] RAN room bus
[15] OSYnet group bus
[16] Do not use!
a.
Not included in the scope of delivery,
please order separately.
120 mm
120 mm
00 8802 97, 03/23 (Rev. 7.0)
5
Publicité
