Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Symptom
Symbol Lo appears in the
timer display.
Error code E1/E2.
Error code E3/E4.
Error code E5/E6.
Other error codes.
Possible cause
Key lock function is activated. Deactivate the lock function:
Supply voltage or frequency is
different from the rated values.
Internal temperature of the
hob is too high.
Internal temperature of the
hob is too high.
Error on fan left or right.
Air exhaust blocked, for
example by paper.
Defective generator.
Solution
Switch on the hob.
Touch and hold the lock key.
Switch off the hob and let
it cool down (H disappears
from the displays). Switch
on the hob. If the same error
is displayed again, call an
authorised service agent.
Switch off the hob and let
it cool down (H disappears
from the displays). Switch
on the hob. If the same error
is displayed again, call an
authorised service agent.
Check that the fan air exhaust
is free. If the error does not
disappear, call an authorised
service agent.
Contact the service
department.
EN 17
Publicité
