Publicité
Les langues disponibles
Les langues disponibles
USE
•
Never use pans with a misshapen base. A hollow or rounded base can interfere with
the operation of the overheating protection, so that the appliance becomes too hot.
This may lead to the glass top cracking and the pan base melting.
•
Damage arising from the use of unsuitable pans or from boiling dry is excluded from the
guarantee.
Minimum pan diameter
•
The diameter of the bottom of the pan must be at least 14 cm.
•
You will achieve the best results by using a pan with the same diameter as the zone. If a pan
is too small the cooking zone will not work.
Pressure cookers
•
Induction cooking is very suitable for cooking in pressure cookers. The cooking zone reacts
very quickly, and so the pressure cooker is quickly up to pressure. As soon as you switch
a cooking zone off, the cooking process stops immediately.
Power level setting
The cooking zones have 9 power levels. If you have switched on the hob the required cooking
zone can be chosen within the next 60 seconds.
Set the power level by touching the plus (+) or minus (-) keys (see: Operating the induction hob).
Maximum power
During cooking the maximum available power of each cooking zone depends on how
much cooking is needed at the same time:
Number of cooking zones in use
at the same time
Maximum power
Cooking zone Ø
The power level start to flash when the maximum setting is reached.
Pan detection
If the hob does not detect a (ferrous) pan after the cooking power has been set, the pan
detection symbol and the selected power setting will flash alternately in the display and the hob
will remain cold. If a (ferrous) pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off (see also chapter 'Pans').
1
2
9/9/9/9
8/8/8/9
16/18/16/18
16/18/16/18
3
4
6/6/7/7
6/6/6/6
16/18/16/18
16/18/16/18
EN 9
Publicité
