Panasonic NN-GD693S Manuel D'utilisation page 17

This unique function of your Panasonic microwave oven allows you to establish the initial
non-cooking features of your Oven.
This microwave oven has the functions below:
LB/KG CHOICE: The oven has both imperial and metric weight measurements.
BEEP CHOICE: The oven has both Beep On and Beep Off mode.
LB/KG CHOICE • Press Start once.
BEEP CHOICE
• Press Start twice.
The default mode is Beep On.
NOTES: These choices can be selected only when you plug-in the oven.
Set LB/KG and BEEP by following the steps below:
1.
• Plug into a properly grounded electrical outlet.
2.
• Press Start once.
3.
• Press Timer/Clock once to choose metric weight measurements (KG).
4.
• Press Start once to Beep Choice.
5.
• Press Timer/Clock once. The mode changes to Beep Off.
NOTE: After setting, it will revert back to the metric weight measurement setting if Start
pad is pressed again. Press Stop/Reset button to exit.
F00039X90CU_Eng.indd 15 F00039X90CU_Eng.indd 15
Dial Features
TIME CHOICE
Rotate the dial clockwise to increase the cooking time and rotate
the dial counter-clockwise to decrease the cooking time.
WEIGHT CHOICE
Rotate the dial clockwise to increase the weight and rotate the dial
counter-clockwise to decrease the weight setting.
SENSOR MENU CHOICE
Dial can be rotated in either direction to select the Sensor Menus.
Function Features
Plug into a properly grounded electrical outlet.
The oven automatically defaults to
the imperial measure system (LB).
Press Stop/Reset button to exit
• Press Timer/Clock once
to choose metric weight
measurements (KG).
• Press Timer/Clock once.
The mode changes to
Beep Off.
15
2016/6/24 13:19:23 2016/6/24 13:19:23