ESAB Cutmaster 80 Mode D'emploi page 93

5.01 General Maintenance
Warning!
Disconnect input power before maintaining.
Visually inspect the torch body tip,
electrode, start cartridge and shield cup
Replace all
broken parts
Art # A-07938_AB
Manual 0-5396
All manuals and user guides at all-guides.com
SECTION 5 SYSTEM: SERVICE
Visual check of
torch tip and electrode
Visually inspect the
cables and leads.
Replace as needed
Visually check and
Carefully clean the
interior
ESAB CUTMASTER 80
Each Use
Weekly
3 Months
Clean
exterior
of power supply
6 Months
SERVICE
Maintain more often
if used under severe
conditions
5-1