LAVAZZA SMEG Mode D'emploi page 33

Remove and empty the water tank.
Fill the tank with the Lavazza DESCALING agent
8.7 fl oz (250 ml) and water 8.7 fl oz (250 ml).
Use a moist cloth to wipe off the squirts or drops, if
any.
Fit the tank back into place on the machine.
Place a suitable container under the dispenser.
Once the warming process is over, the ESPRESSO
button with a steady orange light will be the
only one available to start the descaling operation.
MAINTENANCE AND CLEANING
Press the ESPRESSO
ling cycle.
Pressing the button over a long time will have no ef-
fects on the machine.
The descaling procedure involves supplying 2 fl oz (60
ml) of solution alternating with a fifteen seconds' pause,
until the tank is emptied.
During the descaling process, the ESPRESSO
button will blink to an orange light (1 sec. ON / OFF).
Once the descaling process has been activated, it
cannot be interrupted until when the machines deliv-
ers the full quantity of descaling solution and water
needed for rinsing.
This means that, if the machine is set to the stand-by
mode owing to a power cut-off, the process will be
resumed from the point where it has been interrupted.
The sequence will be repeated until the "tank emp-
ty" condition is achieved (approximately 15.5 fl oz
(500 ml), equal to six supply instances).
33
EN
button to start the desca-