Publicité
Les langues disponibles
Les langues disponibles
• On the Smart Panel: First make sure the Smart Panel is in STANDBY mode, and then enter into
ALERT mode by taking the following steps:
Keys
Description
1
(1234/
You must be in STANDBY
4-digit
mode before turning to
PIN)
ALERT mode
+
2
(1234/
Enter 4-digit PIN, press
4-digit
and
for ALERT
PIN)
mode
+
+
B. Exiting the ALERT mode
• On the Smart Panel: Enter your 4-digit PIN followed by
• On the Key Fob Remote Control: Press
C. Zone settings
Programming each zone in ALERT mode:
Keys
Description
1
(1234/
You must be in STANDBY
4-digit
mode before turning to
PIN)
ALERT mode.
+
2
4-digit
Enter 4-digit PIN for
PIN
setting followed by
+
3
Press
then
to set
the ALERT Mode.
4
Press
to complete the
setting.
12
All manuals and user guides at all-guides.com
Note
To make sure you are in STANDBY mode:
- Enter the default PIN " 1 2 3 4 " OR your new 4-digit
PIN
- Press
- The Smart Panel will display the image below when
you are in STANDBY mode:
(One beep indicates that you entered a valid PIN,
three beeps indicate that an invalid operation was
performed).
- The system will then enter ALERT mode
- If the Zone is enabled, a number will appear as
displayed in the image below:
to exit ALERT mode.
to exit ALERT mode.
Note
You must be in STANDBY mode
To make sure you are in STANDBY mode:
- Enter default PIN 1 2 3 4 OR your new 4-digit PIN
- Press
- The Smart Panel will display the below image:
(One beep indicates that you entered a valid PIN,
three beeps indicate that an invalid operation was
performed).
The Smart Panel will display the below image:
.
(One beep indicates that you entered a valid PIN,
three beeps indicate that an invalid operation was
performed).
Toggle 1, 2, 3, 4, 5, 6, 7, 8 to turn each zone ON or OFF
- If no number appears, the zone is turned OFF
The Smart Panel will display the below image:
Confirm the setting and return the Smart Panel to
STANDBY by pressing
3.3.4 HOME mode
There are default settings that allow the system to operate after opening the package. These settings
can be adjusted to suit your individual requirements The HOME mode allows the system operate in
both the ARM and ALERT modes in different zones.
HOME mode default setting:
Sensor
Zone
Door/Window Sensor
1
Door/Window Sensor
2
Motion Sensor
8
A. Entering the HOME mode
• On the Key Fob Remote Control: Press
• On the Smart Panel: First make sure the Smart Panel is in STANDBY mode, and then enter HOME
mode by taking the following steps:
Keys
Description
1
(1234/
You must be in STANDBY
4-digit
mode before turning to
PIN)
HOME mode.
+
2
4-digit
Enter 4-digit PIN, press
PIN
and for
HOME
+
mode.
+
B. Exiting the HOME mode
• On the Smart Panel: Enter your 4-digit PIN followed by
• On the Key Fob Remote Control: Press
C. Zone settings
Programming each zone in HOME mode:
Keys
Description
1
(1234/
You must be in STANDBY
4-digit
mode before turning to
PIN)
HOME mode.
+
Status (MODE)
ALERT
ALERT
ARM
to activate.
Note
To make sure you are in STANDBY mode:
- Enter default PIN 1 2 3 4 OR your new 4-digit PIN
- Press
- The Smart Panel will display the below image:
(One beep indicates that you entered a valid PIN,
three beeps indicate that an invalid operation was
performed).
- Then system will enter HOME mode
- If the Zone is enabled, a number will appear as
displayed in the image below:
to exit HOME mode.
to exit HOME mode.
Note
You must be in STANDBY Mode before any steps.
To make sure you are in STANDBY mode:
- Enter default PIN of 1 2 3 4 or your 4-digit PIN
- Press
- The LCD screen will display the below image:
(One beep indicates that you entered a valid PIN three
beeps indicate that an invalid operation was performed).
13
Publicité
