Cherubini Plug & Play 3000 Instructions page 24

LIMIT SWITCHES AND OBSTACLE DETECTION
Obstacle detection in both direction is enabled only after both limit switches have been
set.
The motor also has an super-sensitivity obstacle detection in downwards, which can be
set on three levels (see page 23).
In the event an obstacle is detected, the motor will perform a safety movement in reverse.
RESTORING THE ORIGINAL CONFIGURATION
PLEASE NOTE: recovery of the default configuration will delete the limit switches
and disabling the super-sensitivity.
To restore the original motor configuration perform the procedure as described below:
- Connect both the brown and black motor wires under the same switch, e.g. UP.
- Press the UP button for at least 2 seconds.
- Disconnect and then restore the original control switch electrical connections (see
page 15).
UP DOWN
1- Brown
2 - Black
3 - Blue
4 - Yellow-green
24