Controls and display
Power switch O/I
The power switch O/I (7) is used to switch
the appliance on or to switch it off fully
(power supply off).
In "energy saving mode" an LED lights up in
the display.
7
4
Important:
Do not press the power switch
while the appliance is operating.
You should only switch off the ap-
pliance after putting it into "energy
saving mode" by retracting the
navigation button. This initiates
automatic rinsing of the appliance.
Neff
Menu and display
The appliance features user-friendly menu
navigation to ensure that operation is as easy
as possible while at the same time offering a
wide range of functions. It allows you to select
from a multitude of options in only a few steps
once you know how. The display shows which
programme you have selected and lets you
know when you need to top up the appliance
with water or coffee, or run one of the service
programmes. Basic menu operation is de-
scribed in the following pages.
1
2
3
4
1 i : If you press i briefl y, information is
shown on the display (see "Displaying
information"). If you keep i pressed for at
least three seconds, you open the set-
tings menu (see "Displaying settings").
Y
2
: This button is used to navigate
upwards in the display (3). The currently
active menu item is shown in a larger
font.
3 D isplay: The display uses symbols
and texts to indicate settings, ongoing
p rocesses and messages.
4 R etractable navigation button :
Not retracted: The appliance is switched
on. After it is switched on the appliance
rinses, unless it is still warm from its last
use.
English | 35
5
6
C77V60N2 | 03/2011