Olimpia splendid CARBON BLACK Mode D'emploi Et D'entretien page 23

• Leave at least 1m of free space on the sides, behind the appliance and above it (fig. 1).
• Connect the plug to the power socket.
• Make sure the mains data correspond to
what is described on the data plate of the
appliance.
• Arrange cord away from traffic areas so
that it will not be tripped over.
3 - USE
• MIN
• MAX
• Knob set to "OFF"
(appliance OFF)
If you wish to activate appliance oscillation, turn the right-hand knob to TURN
position. To deactivate oscillation, simply turn the knob to OFF position.
The appliance is equipped with an overturning switch. If the appliance is
overturned, it automatically stops operation.
4 - OVERHEAT PROTECTION
• This heater is protected with overheat protection that switches off the appliance
automatically in case of severe overheating
In this case:
- unplug the appliance;
- wait about 30 minutes for it to cool;
- remove any possible cause of overheating, eg. something covering the heater;
- check for damage to the appliance, the cord and the plug.
• If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for assistance.
CARBON BLACK EN - 9