Olimpia splendid CARBON BLACK Mode D'emploi Et D'entretien page 22

1 - DESCRIPTION OF THE APPLIANCE AND OF THE COMMANDS
1. Switch knob
2. Back cover
3. Reflector/radiator
4. Front net
1
2
3
4
2 - INSTALLATION
• The appliance does not require installation and must exclusively be used as a portable
device.
• After removing the packaging, check that the appliance is in perfect condition; in case
of doubts do not use it and refer to professionally qualified personnel.
• Assemble the body frame and the base plate together as the following sequences:
- position the body of the appliance on the base, ensuring the anti-topple switch goes
through the appropriate hole on the base;
- fasten the body of the appliance to the base using the three wing nuts provided;
- route the power cord into the raceway on the rear of the base.
• Entirely straighten the power cord.
• Place the appliance in an appropriate environment and on a stable and flat surface.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
EN - 8
5. Halogen heating element
6. Front cover
7. Base
1
5
6
7