Technical Data - Husqvarna K 7000 Manuel D'utilisation

Technical data

Motor
Electric motor
Max. speed of output shaft, rpm
3-phase operation, Motor output - max kW
1-phase operation, Motor output - max kW
1-phase, V
Weight
Power cutter with cable package, without cutting equip-
ment, Ibs/kg
Water cooling
Water cooling of motor
Water cooling of cutting equipment
Recommended water pressure, PSI/bar
Min. recommended water flow, l/min
Connecting nipple
1
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed dB(A)
2
Sound levels
Sound pressure level at the operator's ear, dB(A)
3
Vibration levels, a
hv
2
Front handle, m/s
2
Rear handle, m/s
Recommended cutting equipment
specification
Guide bar/ Number of dia-
diamond chain mond chain seg-
ments
12"/0.444" 25
14"/ ⅜" 32
1
Noise emissions in the environment measured as sound power (L
measurement uncertainty 3 dB(A).
2
Sound pressure level according to EN 60745-2-13. Expected measurement uncertainty 2 dB(A).
3
Vibration level according to EN 60745-2-22. Reported data for vibration level has a typical statistical disper-
sion (standard deviation) of 1.0 m/s
1455 - 003 - 03.03.2020
Technical data
HF High Frequency
8800
5.5
3
120-240
20/9.1
Yes
Yes
21.8-87/1.5-6
4.5 at water temperature 15°C
Type Gardena
110
112
99
2.7
2.1
Diamond chain Diamond chain
segment width, pitch, in./mm
in./mm
0.22/5.7 0.444/11.582
0.22/5.7 ⅜ / 9.525
2
. The vibration values are valid for manual operation.
Max. cutting
depth in./mm
14/350
16/400
) according to EN 60745-1. Expected
WA
Diamond chain
speed at max.
engine power
speed, ft/s / m/s
85/26
79/24
23