Bercomac 700444-2 Feuille D'instructions page 3

COUNTERWEIGHTS FOR MTD TRACTORS
8
10
a) Set the parking brake and remove the ignition key.
b) Slide the slot (item 1) of the right support plate (item 2) over the stud (item 3). Secure with one hex. bolt
7/16'' n.c. x 1'' (item 4) and one hex nut (item 5) in hole A. Tighten loosely. Do the same with the left support
plate (item 6).
c) Slide the support flat bar (item 7) in the vertical slots on the support plates.
d) Place six weights (item 8) between the support plates and secure in place by inserting the pin (item 9)
through the support plates and through the weights. Lock in place with a hair pin 4mm (item 10) on each
side.
Tighten all bolts and nuts securely.
e)
FI_700444-2-EN_FR
Install the kit according to the following instructions:
MTD TRACTORS NX15 FRAME
7
6
9
#700444-2
5
1
4
2
Instruction Sheet
3
A
R-11042015