KaVo IXS Manuel De L'utilisateur page 40

KaVo IXS
Recommended Separation Distances Between
Portable and Mobile RF Communications Equipment and the KaVo IXS Sensor
The KaVo IXS sensor is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the
KaVo IXS sensor can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF communications
equipment (transmitters) and the KaVo IXS sensor as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
output power
of transmitter
in Watts
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmit-
ter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
B-6
Separation distance according to frequency of transmitter
150 kHz to 80 80 MHz to 800
MHz
0.12
0.37
1.17
3.69
11.67
in meters
800 MHz to 2,5
MHz
0.12
0.37
1.17
3.69
11.67
GHz
0.23
0.74
2.33
7.38
23.33
English